Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Channels always have current
#1
I have a problem with the board... Channels 0, 3, 7, and 13 are always powered. 

I have disconnected everything from the board except the power and only in those 4 channels always have 24v at the output. 

Is it a board or programming problem? I think it's the board because the other outputs work fine...

What can I do?
Reply
#2
do you use by home assistant via esphome?
now we have released "KCS" v2 firmware for KC868-AP, i think you can download "KCS" firmware for a test.
Reply
#3
I have installed the KCS firmware and the same thing keeps happening, It seems like a hardware error...

When I connect some led it always is on. 4 useless channels...
Reply
#4
can you take a photo how your wire your board.
Reply
#5
I uploaded a video: https://www.youtube.com/watch?v=_5MHBN6P_Pg

Channel 2 works fine, channel 1 always is ON.
Reply
#6
if you exchange channel1 and channel2's LED, whether also is channel2 always ON. i just want to confirm, whether the LED strip have different.
Reply
#7
If I exchange channel1 and channel2's LED, always CHANNEL 1 is ON. Is not a strip led problem... The problem is the board hardware...
Reply
#8
give me your order number, which online store URL you have bought.
Reply
#9
I've sent you a PM
Reply
#10
received, we have check, you have bought from our agent, not our official online store. we will let their seller send message by aliexpress to help you.
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)