+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A4 (https://www.kincony.com/forum/forumdisplay.php?fid=21)
+--- Thread: KC868-A4 wiring diagram (/showthread.php?tid=3075)
KC868-A4 wiring diagram - KinCony Support - 07-14-2023
RE: KC868-A4 wiring diagram - fra6767ita - 10-29-2023
Hello, how to wire( wire 0.5 ) a switch panel ? I use A4 with tasmota (...pin 36 39 27 14 ) k 1 k2 kcom to gnd d1 d2 d3 d4 of A4..thank you
RE: KC868-A4 wiring diagram - admin - 10-29-2023
yes, D1,D2,D3,D4 can use for switch buttons.
RE: KC868-A4 wiring diagram - fra6767ita - 10-30-2023
Good morning,
Let me explain better...I have its two-button switch.
Behind there are 5 contacts ( kc, k 1 k2 k3 k 4) and another 6 contacts ( dc gnd d1 d2 d3 d 4)... how should I connect these with the contacts d1 d2 d3 d4 of the kc868-A4?.. how and how many threads...thank you
RE: KC868-A4 wiring diagram - admin - 10-30-2023
let your ESP32 board relay output DC12v, then connect to your switch panel's D1,D2,D3,D4 , LED on switch panel will be ON/OFF by dc12v or 0V. which electronic level will ON, suggest you have a test, i am not see your switch panel photo, so i can't sure.
RE: KC868-A4 wiring diagram - fra6767ita - 10-31-2023
Thanks for the reply...I attach a copy of the back of the kincony 2-way switch...I have to connect it to the kincony kc868-a4...switch has: 5 contacts ( kc, k 1 k2 k3 k 4) and another 6 contacts ( dc gnd d1 d2 d3 d 4)... as you can see from the photo above there is the gnd of the kc868-a4 connected to the k-com of the switch.. then there is the k1 red wire of the switch connected to the a4 d2 and d1 of the kc8687-a4...and the k2 yellow wire connected to d3 of the kc868-a4
RE: KC868-A4 wiring diagram - KinCony Support - 11-01-2023
(10-31-2023, 02:53 PM)fra6767ita Wrote: Thanks for the reply...I attach a copy of the back of the kincony 2-way switch...I have to connect it to the kincony kc868-a4...switch has: 5 contacts ( kc, k 1 k2 k3 k 4) and another 6 contacts ( dc gnd d1 d2 d3 d 4)... as you can see from the photo above there is the gnd of the kc868-a4 connected to the k-com of the switch.. then there is the k1 red wire of the switch connected to the a4 d2 and d1 of the kc8687-a4...and the k2 yellow wire connected to d3 of the kc868-a4
A4---GND ---->switch KCOM
A4---D1-------> switch K1
A4---D2------->switch k2
A4---D3------->switch k3
A4---D4------->switch k4
Ignore the switch D1 D2 D3 D4 GND and DC
RE: KC868-A4 wiring diagram - fra6767ita - 11-01-2023
Very good..now it works. Thank you, Have a nice day.