+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: KC868-A16 with KCS firmware (/showthread.php?tid=8137)
KC868-A16 with KCS firmware - geko - 06-04-2025
hello
I have KC868-A16 board (green pcb, not v3)
To this board I first upload KCS firmware - latest possible V2.2.13
Firmware loaded, first login - no problem
When I put one or all outputs no one light turn on
Why ?
(nothing connected to outputs)
RE: KC868-A16 with KCS firmware - admin - 06-05-2025
make sure you have connect 12v or 24v with "DC" terminal on PCB. see the photo RED cable whether have used?
RE: KC868-A16 with KCS firmware - geko - 06-05-2025
(06-05-2025, 12:12 AM)admin Wrote: make sure you have connect 12v or 24v with "DC" terminal on PCB. see the photo RED cable whether have used?
after connecting 12V to DC terminals everything working
tell me one more thing
outputs on this board are proper for driving SSR like this one from images ?
SSR type DC-AC; DC control signal, AC load
![[Image: Sb1149228052a4fe2a73ccef1da2d48d2Z.jpg]](https://ae01.alicdn.com/kf/Sb1149228052a4fe2a73ccef1da2d48d2Z.jpg)
![[Image: S155cca81a5a54b3b8cae7974f7bfe05cB.jpg]](https://ae01.alicdn.com/kf/S155cca81a5a54b3b8cae7974f7bfe05cB.jpg)
RE: KC868-A16 with KCS firmware - admin - 06-05-2025
just make sure your SSR work voltage is DC12v or 24v is ok. i think you can chose "3-32VDC" LCDR-480 version.