+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" v2 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: "KCS" v2.2.14 firmware BIN file download (/showthread.php?tid=8267)
Pages:
1
2
"KCS" v2.2.14 firmware BIN file download - admin - 06-26-2025
v2.2.14 improvement:
added DO as IFTTT IF conditon
RE: "KCS" v2.2.14 firmware BIN file download - D2K - 06-27-2025
Good day,
first of all, thank you for your developments, iam delighted with the A6 boards, they suit me perfectly
secondly, special thanks for DO in fmw 2.2.14, this is the question with which i come to this forum.
RE: "KCS" v2.2.14 firmware BIN file download - twostar - 06-27-2025
Nice! Now it'll be possible to create ladder-logic programs for the KC868. Can't wait to see this in the v3 firmware too.
RE: "KCS" v2.2.14 firmware BIN file download - admin - 06-28-2025
use by PLC ladder-logic？ import ladder-logic file?
RE: "KCS" v2.2.14 firmware BIN file download - twostar - 06-28-2025
What I meant was that with the ability to take the DO output from a previous IFTTT rule and use it as the input to another IFTTT rule it's almost like ladder logic, which greatly increases what you can do with IFTTT rules.
RE: "KCS" v2.2.14 firmware BIN file download - admin - 06-28-2025
1. KCS v3 will support DO with IFTTT soon.
2. how about create two IFTTT command about you said "ladder logic"?
RE: "KCS" v2.2.14 firmware BIN file download - Lix1 - 10-24-2025
Will the implementation of this feature in KCS v3 be identical to v2.2.14, or are there any planned improvements or changes in how the 'ladder logic' chaining works?
RE: "KCS" v2.2.14 firmware BIN file download - admin - 10-24-2025
KCS v3 is more powerful than KCS v2. now no plan for "ladder logic".
RE: "KCS" v2.2.14 firmware BIN file download - Lix1 - 10-25-2025
Thank you for the update. It's great to hear v3 is more powerful, but I'm quite surprised by the decision to drop 'ladder logic.
nulls clash
RE: "KCS" v2.2.14 firmware BIN file download - acztassi - 11-05-2025
Hello, I’m having a problem with KC868-AIO and MQTTT.
All DAC channels dos not send the right value to MQTTT, and if I send a MQTTT to change it’s value, nothing happens.
If I change the DAC through the KCS monitor, no MQTTT message is sent.
I’ve tested ADC, it’s ok.