reset factory on A8 - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: KC868-AM (https://www.kincony.com/forum/forumdisplay.php?fid=45) +--- Thread: reset factory on A8 (/showthread.php?tid=8632)

reset factory on A8 - philippe - 10-07-2025 Hi,several questions after I spent time on looking answers. I lost access to my  A8. What are the S1 and S2 usage? On the schematics, both seems to do the same. I press more than 10s S1, then S2. I can connect to Kinc AP on 4.1 On the login page, I tried  admin/null, admin/admin ,always login error. I tried another board, same issue. My 12v is 11,7. I guess its not a problem. Please help Thanks RE: reset factory on A8 - admin - 10-08-2025 S1 is ESP32 reset button. S2 is ESP32 GPIO0 button, use for reset. if you already downloaded KCS v2 firmware. after download KCS v2 firmware, default user name: admin   password: admin KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html RE: reset factory on A8 - philippe - 10-08-2025 Thanks, I reloaded v2 kcs. on both boards. There are in AP mode, I can connect to their wifi, I get on my phone an ip address on sub segment .4, I can access the login page on IP 4.1, I use admin/admin and it stays on the login page. Seems that the login /pass are accepted, as, if I use a different passwd, I have an error message (login pass incorrects). Using the rj45, no problem, admin/admin is accepted and everything seems ok. I have A8 v1.5 and V1.6 boards. I loaded the last kcs .14. I tried the v3, but without success. So strange that I cant login in wifi AP mode RE: reset factory on A8 - admin - 10-09-2025 KC868-A8 only use by KCS v2, can't use by KCS v3, it's not ESP32-S3. you already can login by admin / admin. how you change password and can't login? take a photo of screen how you change password. and login window. RE: reset factory on A8 - philippe - 10-09-2025 When I reset factory the board, I can connect when wired. I dont change the login detals. Then, when I connect by wifi, I get the login page, fill admin admin , it cleard the login details, and no other page comes. If I put a different login, admin/anuything, I get the login details  error message. I tried to post a picture, but error message too long ( the picture is a small one). Anyway, it does not show anything more. RE: reset factory on A8 - admin - 10-09-2025 can you take a photo or video , so that can understand you.