KinCony Analog Input Wiring Guide: 0–5 V, 0–10 V and 4–20 mA

[admin]

   

• 0–5 V / 0–10 V: Connect the sensor OUT to AI1. Connect the sensor and controller to a common GND.
  
• 2-wire 4–20 mA: Power supply positive → Transmitter +; Transmitter − → AI1; Controller GND → Power supply negative.
  

Before use, configure the input range and jumper settings according to your controller model. The 4–20 mA wiring example applies to passive current inputs with an onboard sampling resistor.