B16M 로컬제어

[admin]

1. Because you have not connect two DC terminal with power DC12V or 24V. Do you seen the Digital output have two "DC" port, need to wire.

2. as same as 1.

3. if you want set to NC, you can visit "OUTPUT" webpage, just enable "reverse" option.

4. 12V use for digital input port is ok.

5. sure, Tuya just an option.

6. KCS v3 firmware online guide: https://www.kincony.com/how-to-use-kcsv3...board.html

7. it's ok.