power input 24v

[tech1977]

Is it possible to use 24v for power input instead of 12v?

[admin]

no, A32 only use dc12v power supply, because relay coin is dc12v version.

[tech1977]

no, A32 only use dc12v power supply, because relay coin is dc12v version.

but here I asked for KC868-A16 ....

[admin]

A16 support DC12-24V for power supply.

[djbeuk]

Hi. I just ordered an A16 as well and I had the same  question. The image shows 12/24V for the DC Input for the digital outputs. But only 12V for Power Input. 
So just to confirm - the Power Input for the board itself can also be 24, correct?

Thanks in advance.

[admin]

yes, you are right. you can use DC12v for all terminal or DC24v for all terminal (include power input port).

[korl]

yes, you are right. you can use DC12v for all terminal or DC24v for all terminal (include power input port).

Is it possible to
1. supply the A16 with 12 V and power one Terminal with 12 V and the other Terminal with 24 V?
2. supply the A16 with 24 V and power one Terminal with 12 V and the other Terminal with 24 V?

I would like to connect different devices, some use 12 V, some use 24 V

[admin]

both ok, just two power supply GROUND should connect together.