kWh resolution

[admin]

please download newest PC software v1.0.26.0306. this version support show with 0.001kwh.

[Vega]

Data was cleared, but I did it again with this version.


But still this, this is with a 100W bulb



This is part of the yaml code.

Code:

uart:
# id: modbus_uart
  rx_pin: 9
  tx_pin: 10
  baud_rate: 115200
  stop_bits: 1
  data_bits: 8
  parity: none
 
modbus:

modbus_controller:
  - address: 1
    update_interval: 5s

sensor:
  - platform: modbus_controller
    address: 100
    register_type: holding
    name: current_1
    id: n30_1_current_1
    unit_of_measurement: A
    device_class: current
    accuracy_decimals: 3
    value_type: U_DWORD_R
    filters:
      - multiply: 0.001

  - platform: modbus_controller
    address: 118
    register_type: holding
    name: current_10
    id: n30_1_current_10
    unit_of_measurement: A
    device_class: current
    accuracy_decimals: 3
    value_type: U_DWORD_R
    filters:
      - multiply: 0.001

  - platform: modbus_controller
    address: 120
    register_type: holding
    name: power_1
    id: n30_1_watt_1
    unit_of_measurement: W
    device_class: power
    accuracy_decimals: 1
    value_type: U_DWORD_R
    filters:
      - multiply: 0.1

 

  - platform: modbus_controller
    address: 138
    register_type: holding
    name: power_10
    id: n30_1_watt_10
    unit_of_measurement: W
    device_class: power
    accuracy_decimals: 1
    value_type: U_DWORD_R
    filters:
      - multiply: 0.1

  - platform: modbus_controller
    state_class: total_increasing
    device_class: energy
    address: 140
    register_type: holding
    name: energy_01
    id: n30_1_energy_1
    unit_of_measurement: kWh
    accuracy_decimals: 1
    value_type: U_DWORD_R
  
 
  - platform: modbus_controller
    state_class: total_increasing
    device_class: energy
    address: 158
    register_type: holding
    name: energy_10
    id: n30_1_energy_10
    unit_of_measurement: kWh
    accuracy_decimals: 1
    value_type: U_DWORD_R

  - platform: modbus_controller
    state_class: total_increasing
    device_class: energy
    address: 160
    register_type: holding
    name: energy_sum
    id: n30_1_energy_sum
    unit_of_measurement: kWh
    accuracy_decimals: 1
    value_type: U_DWORD_R

  - platform: modbus_controller
    address: 162
    register_type: holding
    name: voltage
    id: n30_1_voltage
    unit_of_measurement: V
    device_class: voltage
    accuracy_decimals: 1
    value_type: U_WORD
    filters:
      - multiply: 0.01

  - platform: modbus_controller
    address: 163
    register_type: holding
    name: frequency
    id: n30_1_period
    unit_of_measurement: Hz
    device_class: frequency
    accuracy_decimals: 1
    value_type: U_WORD
    filters:
      - multiply: 0.01

  - platform: modbus_controller
    address: 164
    register_type: holding
    name: tps1
    id: n30_1_tps_1
    unit_of_measurement: °C
    device_class: temperature
    accuracy_decimals: 1
    value_type: FP32_R

[admin]

we will update esphome yaml later, will post at here.