Can the H32BS controller output 24VDC? I guess we can mix 12vdc and 24vdc as far as output is concerned as long as the VIN has the desired voltage. How do we ground the 24VDC output for a specific VIN assuming the same controller will have 12VDC VIN as well?

Thanks much

I located your youtube video for H32B wifi config which is very good: https://www.youtube.com/watch?v=2AViXMH8yHM
Do you have a similar video for ColB wifi configuration?

I've about 15 shades operated by 12vdc board. Please take a look at the attached photo. The blue wires are the triggers for the different electric motors for the shades. When I connect the blue wires with 12VDC ground(-ve), the shade operates.  Is there a way to configure the H32BS to output ground/-ve 12vdc?

Thanks much

Attached Files

Thumbnail(s)
   

Hi All and zkincony custmer technical support.
After heavely tedted the Kbox on H32B last month, i saw Kbix need more development regarding the functions.
1. The Scene is quite limited without  ability to add more functions such as :-
At sunset current location time switch on certain loads and vice versa at sunrise dwitvh off.
2. Adfing timer for certain time opening and closing certain load such as shutter then then if you would like to shut in 25% or 50% can be achieved.
3. Reading volt, frequency, current Amp, PF on each circuit and total of those.
 I attached some useful features for compatitor app.

Attached Files

Thumbnail(s)
                   
                   
           

Hi All and zkincony custmer technical support.
After heavely tedted the Kbox on H32B last month, i saw Kbix need more development regarding the functions.
1. The Scene is quite limited without  ability to add more functions such as :-
At sunset current location time switch on certain loads and vice versa at sunrise dwitvh off.
2. Adfing timer for certain time opening and closing certain load such as shutter then then if you would like to shut in 25% or 50% can be achieved.
3. Reading volt, frequency, current Amp, PF on each circuit and total of those.
 I attached some useful features for compatitor app.

Attached Files

Thumbnail(s)
       
                   
                   
   

Hi All and zkincony custmer technical support.
After heavely tedted the Kbox on H32B last month, i saw Kbix need more development regarding the functions.
1. The Scene is quite limited without  ability to add more functions such as :-
At sunset current location time switch on certain loads and vice versa at sunrise dwitvh off.
2. Adfing timer for certain time opening and closing certain load such as shutter then then if you would like to shut in 25% or 50% can be achieved.
3. Reading volt, frequency, current Amp, PF on each circuit and total of those.
 I attached some useful features for compatitor app.

Attached Files

Thumbnail(s)
               
                   
               

hey,

i read here in forum that a module with 32 I/O is planed. so i have some questions

is it planed with relays or mosfets?
i2c possible?
release date?
12V or 24V?
which other additional inputs are planed? (analog in/out etc...)


greetings

We have successfully developed the most innovative product — KC868-Server. KC868-Server is a super smart controller for smart home automation and industrial automation control. KC868-Server smart controller support MOSFET output and wall switch connect to it directly. Also have analog input and digital input ports. The most important is integrated Raspberry pi CM4 module. Also integrated ESP32 module for you to write your own code. It’s very powerful and flexible.

a. Support different work mode:

UDP (connect with KinCony’s Cloud server)
TCP Server (controller work as a server)
TCP Client (controller connect to any user’s server)
MQTT (connect to any MQTT broker server)

b. Output auto recovery when power failure
c. every channel output can set momentary time independently (1—10000 seconds)
d. user can define “double click” action for every switch buttons.
e. input sensor filter time can set 10ms—1 second.
f. 16 switch buttons support multi-click MQTT message feedback.

improvement:

Enable base address for MODBUS protocol, so that can turn ON/OFF some relays by one MODBUS command.

download the ZIP file , unzip update the bin file for KC868-H32BS relay controller by USB-RS232 cable.

  H32BS_V145_20220226.zip (Size: 53.6 KB / Downloads: 947)

Anybody interested in using the KC868-H32B with Loxone, has to select "Virtual Outputs" and import this template. After this file is imported only the IP address as per user's ip address has to be give. There is no need to configure all the 32 relays for ON and OFF commands.

Thanks for Mr wilson from Kuwait shared this config file.


  VO_KC868-H32B.zip (Size: 710 bytes / Downloads: 980)