arduino IDE source code BlueTooth control relay function for KC868-A4 and Google App Inventor source code download:

  bluetooth.zip (Size: 32.76 KB / Downloads: 1266)

Hi, the KC868H16 is supported by Home Assistant ? If yes, there is a youtube tutorial ?
Thanks.

Made by
KC868-H32L relay controller
KC868-COLB logical controller
       

Hello everyone!

We are using KC868-H32 via Ethernet connection and have problems with PC app:

1. We cannot check the connection status while the application is running. So after the first successful connection, we don't know the current status. If something goes wrong, we will not know about it.

2. If there is no connection between the PC and the relay module, we can still turn the relays on and off in the app, but the relays will not switch in reality! And if we do this remotely, it is very difficult or impossible to check if the relays are actually switching.
Dear Kincony Team, what should we do? Maybe you have a new version of the app?
Thanks in advance!

#define DAC1 25
#define DAC2 26

#define ANALOG_A3  32
#define ANALOG_A4  33

#define ANALOG_A1  34
#define ANALOG_A2  35

const int Relay1 = 2;
const int Relay2 = 15;
const int Relay3 = 5;
const int Relay4 = 4;

const int DI1 = 36;
const int DI2 = 39;
const int DI3 = 27;
const int DI4 = 14;

const int BEEP = 18;

DS18B20 ds(13);

1. Download and install Arduino from https://www.arduino.cc/
2. add "https://dl.espressif.com/dl/package_esp32_index.json" to your "Additional Boards Manager URLs"

3. Search "ESP32" install esp32 by Espressif Systems board.

4. complete.

Hello

I have a 32 channel relay board to control the blinds on the house. Is it possible to set the relay to turn off after a certain time (1 minute)?

KC868-A4 smart controller , many hareware resource for you to use, you can write any code by Arduino IDE to ESP32 wifi/bluetooth module. We will supply demo code for different samples. Everyone can modify and change the code for your own smart home automation system project.

Here is resource list:
WiFi/Bluetooth*1
RS232*1
Relay Output*4
Digital Input*4
433M Transmit PCB port*1
433M Receiver PCB port*1
IR receiver*1
IR sender*1
Analog input (DC0-5V)*2
Analog input (4-20mA)*2
Analog output(DC0-10V)*2
temperature and humidity sensor port*1
Buzzer*1

Hello. I have set up a small installation with the H16B + Domoticz on a Raspberry Pi3, it works well. I would like to know if there is the possibility to include COL B to have analog inputs and manage them under Domoticz. How can I do it?

Thank you.

Attached Files

Thumbnail(s)