+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A8S (https://www.kincony.com/forum/forumdisplay.php?fid=24)
+--- Thread: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant (/showthread.php?tid=2759)
Pages:
1
2
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - admin - 02-03-2024
do you meter RS485 address is "1"? here is KinCony energy meter config tool for PC.
KinCony_Meter_config_tool.zip (Size: 20.55 KB / Downloads: 101)
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - sebagarayco - 02-06-2024
(02-03-2024, 12:53 AM)admin Wrote: do you meter RS485 address is "1"? here is KinCony energy meter config tool for PC.
I believe no. When I power on the energy meter I see Addr 222. When I change slave to 222 I see this:
2024-02-06 12:21:05.145 DEBUG (SyncWorker_7) [homeassistant.components.modbus.modbus] Pymodbus: hub1: Error: device: 222 address: 142 -> Modbus Error: [Input/Output] No Response received from the remote slave/Unable to decode response
2024-02-06 12:21:40.375 DEBUG (SyncWorker_8) [homeassistant.components.modbus.modbus] Pymodbus: hub1: Error: device: 222 address: 144 -> Modbus Error: [Input/Output] No Response received from the remote slave/Unable to decode response
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - admin - 02-07-2024
ok, when have free time, will have a test.
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - sebagarayco - 02-14-2024
(02-07-2024, 12:35 AM)admin Wrote: ok, when have free time, will have a test.
Hi. Did you have any chance to try this? Still not able to use energy meter.
Thanks for your support.
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - admin - 02-15-2024
we will begin work at 2-20-2024
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - admin - 02-16-2024
i have post all details steps at here: https://www.kincony.com/forum/showthread.php?tid=4339
you just need set energy meter --> Parity: NONE
home assistant not support "Parity: EVEN".
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - sebagarayco - 05-09-2024
Hi Kincony, I'm having issues with this modbus meter since I set it up as you indicated me.
For months, the meter-consumption is showing 0.04kWh and not changing value. The only parameters that are showing correctly are the meter-voltage and meter-frequency..
How to fix it?
Attached is a screenshot and this is my config:
- name: hub1
type: serial
baudrate: 9600
bytesize: 8
method: rtu
parity: N
port: /dev/ttyS0
stopbits: 1
sensors:
- name: meter-voltage
slave: 1
address: 100
input_type: holding
data_type: float32
precision: 2
unit_of_measurement: V
device_class: voltage
- name: meter-current
slave: 1
address: 106
input_type: holding
data_type: float32
precision: 2
unit_of_measurement: A
device_class: current
- name: meter-power
slave: 1
address: 118
input_type: holding
data_type: float32
precision: 2
unit_of_measurement: kW
device_class: power
- name: meter-factor
slave: 1
address: 142
input_type: holding
data_type: float32
precision: 2
device_class: power_factor
- name: meter-frequency
slave: 1
address: 144
input_type: holding
data_type: float32
precision: 2
unit_of_measurement: Hz
device_class: frequency
- name: meter-consumption
slave: 1
address: 0
input_type: holding
data_type: float32
precision: 2
unit_of_measurement: kWh
device_class: energy_storage
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - admin - 05-09-2024
already repied in your another thread.
RE: RS485 modbus energy meter integrate to ESPHome yaml file for home assistant - admin - 07-20-2024
don't post repeat topic again, i have said many times.