[Arduino IDE demo source code for KC868-AI]--#04-KC868-AI_RF receive_code

Code:

#include <RCSwitch.h>



RCSwitch mySwitch = RCSwitch();



void setup()

{

  mySwitch.enableReceive(digitalPinToInterrupt(13)); 



  Serial.begin(115200);

  Serial.println();

}



  

void loop()

{

//-------------------------------------

  if (mySwitch.available()) {

   

    Serial.print("Received ");

    Serial.print( mySwitch.getReceivedValue() );

    Serial.print(" / ");

    Serial.print( mySwitch.getReceivedBitlength() );

    Serial.print("bit ");

    Serial.print("Protocol: ");

    Serial.println( mySwitch.getReceivedProtocol() );



    mySwitch.resetAvailable();

  }

  delay(30);

  

}