[Arduino IDE demo source code for KC868-AI]--#04-KC868-AI_RF receive_code

[KinCony Support]

[Arduino IDE demo source code for KC868-AI]--#04-KC868-AI_RF receive_code

Code:

#include <RCSwitch.h>

RCSwitch mySwitch = RCSwitch();

void setup()
{
  mySwitch.enableReceive(digitalPinToInterrupt(13));

  Serial.begin(115200);
  Serial.println();
}

 
void loop()
{
//-------------------------------------
  if (mySwitch.available()) {
   
    Serial.print("Received ");
    Serial.print( mySwitch.getReceivedValue() );
    Serial.print(" / ");
    Serial.print( mySwitch.getReceivedBitlength() );
    Serial.print("bit ");
    Serial.print("Protocol: ");
    Serial.println( mySwitch.getReceivedProtocol() );

    mySwitch.resetAvailable();
  }
  delay(30);
 
}