+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: 3kw heater control (/showthread.php?tid=2874)
3kw heater control - ColEng55 - 05-05-2023
I have a KC868-A16 and trying to get slow pwm or sigma delta running.
Im running home assistant so esp32 maybe would be the tightest integration.
Planning on controlling 3kw heaters via a SSR using one of the above techniques to regulate apparent power.
Thanks
RE: 3kw heater control - admin - 05-05-2023
sure, SSR can work with 3kw load. If it heats up, please add heat sink.
RE: 3kw heater control - ColEng55 - 05-06-2023
(05-05-2023, 09:54 PM)admin Wrote: sure, SSR can work with 3kw load. If it heats up, please add heat sink.
hi sorry not really the question i asked.
using SSR for the simple switched circuit using the A16 works great.
Is there anyway to vary the power using slow pwm or sigma delta using the A16
thanks
RE: 3kw heater control - admin - 05-06-2023
sorry, A16 not have analog output dc 0-10v option. other board have this port can use for adjust power output.