+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: DIY Project (https://www.kincony.com/forum/forumdisplay.php?fid=3)
+--- Thread: Presence sensor issue (/showthread.php?tid=6491)
Presence sensor issue - sebagarayco - 08-26-2024
Hi, I bought Presence Sensor MTDx61 and after wiring it I always see Input turned ON.
Wiring is:
RED: 12v+
BLACK: 12v-
WHITE: 12v-
GREEN: INPUT 1
Is wiring OK? what's missing?
RE: Presence sensor issue - admin - 08-27-2024
BLACK is GND, not use -12v. the sensor power supply is DC12V
GREEN and WHITE cable is dry contact output, not need connect with voltage , do you means "12V-" is GROUND?
can you take a photo how you wire.
here is video tour how to use presence sensor: https://youtu.be/bJBCDPORAh0