+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-AI (https://www.kincony.com/forum/forumdisplay.php?fid=29)
+--- Thread: KC868-AI - input as output HomeAssistant (/showthread.php?tid=6857)
KC868-AI - input as output HomeAssistant - fbuffolo - 10-10-2024
Good morning,
in order to upgrade my home allarm system, I want to buy a KC868-AI. I have a question: I read that the dry contacts inputs can work as output with a KCS firmware; but can I use the input ad output also in Home Assistant?
I need one input as output in order to turn on the siren when one input is in allarm mode.
Thanks in advance.
Fausto
RE: KC868-AI - input as output HomeAssistant - admin - 10-10-2024
sure, KC868-AI INPUT can use in home assistant by ESPHome. the OUTPUT you need add another relay board, because of KC868-AI no OUTPUT on PCB, it's a INPUT module.