+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: Wired Water Leak Sensor on modul A16 (/showthread.php?tid=7110)
Wired Water Leak Sensor on modul A16 - Brouk - 11-23-2024
dear admin,
I would like to connect the "Wired Water Leak Sensor" https://shop.kincony.com/products/wired-water-leak-sensor?_pos=1&_sid=b9780282c&_ss=r to the KC868-A16 module and read the flood value in HomeAssistant in ESPHome.
> could you please publish the wiring diagram for the "Wired Water Leak Sensor" connection to A16?
> the sensor is connected to a digital input and is thus used as an active input in ESPHome?
regards
RE: Wired Water Leak Sensor on modul A16 - admin - 11-23-2024
RED: +12V
BLACK: GND
GREEN: (OUTPUT) COMMON
BLUE: (OUTPUT) Normal Open signal
YELLOW: (OUTPUT) Normal Close signal
you can connect "Normal Open" or "Normal Close" wire to KC868-A16's digital input port.