+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: KC868-A series and Uair Smart Controller (https://www.kincony.com/forum/forumdisplay.php?fid=6)
+--- Thread: A8 keeps dying (/showthread.php?tid=7202)
A8 keeps dying - heffneil - 12-10-2024
I am using a A8 with my drapes. I have NO inputs and just using the built in relays to trigger dry contacts. I am running ESPHome. The A8 I have doesn't have enough relays so I have two units side by side. The are connected to a POE switch and each one is being powered via a POE to 12v splitter. One of the units keeps dying. It will not be pingable. I have disabled the web server in esphome and I have disabled Bluetooth. I reflashed several times. After about 12 hours it will just stop responding. I replaced it with another unit yesterday and today it continues to work with the same firmware. I believe this device is bad - but no idea how to debug and not interested I have too many other things going on. This unit is believed to be bad.
RE: A8 keeps dying - admin - 12-10-2024
you can download KCS firmware to test. download KCS firmware then directly to use.