Manual Control Switches Not working - Printable Version +- Smart Home Automation Forum (https://www.kincony.com/forum) +-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20) +--- Forum: KC868-E16S/E16P (https://www.kincony.com/forum/forumdisplay.php?fid=26) +--- Thread: Manual Control Switches Not working (/showthread.php?tid=7250)

Manual Control Switches Not working - Can - 12-21-2024 Hello... I have a problem. The manual control switches of my KCS_KC868_E16S are not working, they are not active. my latest update is “KCS_KC868_E16S_V2.2.8.bin” It was not working before the update. I connect to the device via web. buttons work but manual switches are not active https://www.kincony.com/forum/showthread.php?tid=2241    ( #08-E16S-Ethernet_Web_server_code) I installed the file on this page but it doesn't work, the ethernet lights don't come on. Only after installing the version update the ethernet lights come on and I can connect via web RE: Manual Control Switches Not working - admin - 12-22-2024 if you want digital input toggle relay output, you need to set by IFTTT webpage. here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html RE: Manual Control Switches Not working - Can - 12-22-2024 Hello. I am actively using homeassistant now, I can turn on and off digitally, but my manual switches are not active. my wall buttons do not work. manual switches were working when I first bought it, after the software update they stopped working I did the steps on the page you suggested and installed the “KCS_KC868_E16S_V2.2.8.bin” version using the flash download tools program. in case there is a problem with the new version, I also installed the old version and tried it, the result is the same.