Manual Control Switches Not working

[Can]

Hello... I have a problem.
The manual control switches of my KCS_KC868_E16S are not working, they are not active.

my latest update is “KCS_KC868_E16S_V2.2.8.bin”
It was not working before the update.

I connect to the device via web. buttons work but manual switches are not active



https://www.kincony.com/forum/showthread.php?tid=2241    ( #08-E16S-Ethernet_Web_server_code)
I installed the file on this page but it doesn't work, the ethernet lights don't come on. Only after installing the version update the ethernet lights come on and I can connect via web

[admin]

if you want digital input toggle relay output, you need to set by IFTTT webpage.
here is KCS v2 online guide: https://www.kincony.com/esp32-kcsv2-firmware.html

[Can]

Hello. I am actively using homeassistant now, I can turn on and off digitally, but my manual switches are not active. my wall buttons do not work.

manual switches were working when I first bought it, after the software update they stopped working

I did the steps on the page you suggested and installed the “KCS_KC868_E16S_V2.2.8.bin” version using the flash download tools program.

in case there is a problem with the new version, I also installed the old version and tried it, the result is the same.