+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: KC868-A16 (https://www.kincony.com/forum/forumdisplay.php?fid=25)
+--- Thread: KC868-A16 Tasmota (/showthread.php?tid=7366)
KC868-A16 Tasmota - laimonas.kairiukstis - 01-13-2025
what are the steps to start Tasmota on KC868-A16 rev.1.6 ESP32-Wroom-32E.
I started automatic install from Tasmota site:
Install Tasmota
Finally I got Tasmota installed, but the outputs do not work.
RE: KC868-A16 Tasmota - admin - 01-13-2025
take a photo of your KC868-A16 board, how you wrie, maybe you have not connect power to "12V" label on PCB. there are two green socket pin showed "12V".