+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=20)
+--- Forum: "KCS" v2 firmware system (https://www.kincony.com/forum/forumdisplay.php?fid=40)
+--- Thread: Firmware for KC868-A16v3 Board (/showthread.php?tid=7798)
Firmware for KC868-A16v3 Board - classiccars - 03-14-2025
Does anybody know wich firmware I must use for the KC868-A16v3 Board?
I loaded KCS_KC868_A16_V2.2.12.zip with USB and now the board does not work anymore.
Was it the wrong firmware?
RE: Firmware for KC868-A16v3 Board - twostar - 03-14-2025
As the name should indicate, that's v2 firmware. For the v3 board you need v3 firmware, KCS_A16V3_V3.something.
RE: Firmware for KC868-A16v3 Board - admin - 03-14-2025
https://www.kincony.com/forum/showthread.php?tid=7783
RE: Firmware for KC868-A16v3 Board - classiccars - 03-14-2025
Thank you.
I installed KCS_A16V3_V3.8.0.zip
But the device does not work, no connection with lan.
See uploader-pic. Is this correct?
RE: Firmware for KC868-A16v3 Board - admin - 03-14-2025
after download , MUST re power on of board.
RE: Firmware for KC868-A16v3 Board - classiccars - 03-14-2025
Thank you. Problem solved
RE: Firmware for KC868-A16v3 Board - admin - 03-14-2025
ok, good.