+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=72)
+--- Forum: T16M (https://www.kincony.com/forum/forumdisplay.php?fid=73)
+--- Thread: Cross units communication (/showthread.php?tid=7855)
Cross units communication - eladn - 03-21-2025
Hello
Assuming I have several units of T16M and/or B16M connected via Ethernet to the same net. Is it possible to configure them to operate together? For example, can I define a digital input of one unit to control output ports of another unit (of the same model type)? Which protocols / SW approaches allow such cooperative operation and which aren't?
Thanks,
Elad
RE: Cross units communication - admin - 03-22-2025
sure, it's OK. you can download KCS v3 firmware to controller.
then define customize protocol in KCS. set by IFTTT, let controller-A input trigger THEN send customize command to controller-B by RS485 or TCP or HTTP protocol.