+- Smart Home Automation Forum (https://www.kincony.com/forum)
+-- Forum: Technical Support (https://www.kincony.com/forum/forumdisplay.php?fid=1)
+--- Forum: DIY Project (https://www.kincony.com/forum/forumdisplay.php?fid=3)
+--- Thread: Single Moment switch (/showthread.php?tid=8842)
Single Moment switch - Borg357 - 12-24-2025
I have a Kincony A16v3, with Home Assistant running on a Pi4.
I ran a Momentary Push Button Switch to a switch input on the A16v3. I set up an automation where you press the switch, and it runs an automation.
Is there a way to run a different automation on the way you press the switch? Like, if I hold the button down, it triggers a different automation?
If this exists, can you point me toward a tutorial?
Thank you
RE: Single Moment switch - admin - 12-24-2025
yes, you can use one button for different automation by "1-click", "2-click", "hold on" ways. if can set by KCS v3 firmware IFTTT webpage. this not need manager by home assistant. it can work locally.