Lora code

[EHB]

Is there LoRa code for me to peruse while I wait for my new board (KC 868-A6 I think)
Thanks!

[admin]

https://www.kincony.com/forum/forumdisplay.php?fid=22
here are SX1278 LoRa module arduino demo code

[EHB]

Thanks. I have a LoRaWAN gateway running Chirpstack V4 locally.  

I think I need more than just the LoRa library. Is it possible to install this library? 

https://github.com/mcci-catena/arduino-lmic

From memory in Chirpstack the device needs a unique identification number and an activation code.

[admin]

i am not sure, you can test it. there are many LoRaWAN arduino library on the internet.

[EHB]

Just received the item. The LoRA antenna just gets soldered onto the pin at the extreme inside away from the relays like in the photo I found?

[admin]

take a photo

[EHB]

Does that make sense? I was going to solder the antenna to the top left pin on the LoRa PCB.

[admin]

[EHB]

Thanks. That is the pin I was going to solder it to but it’s good to have confirmation. If I solder it upright like that will it fit in the box? I was going to solder it in an angle but that looks nicer.

[admin]

If I solder it upright like that will it fit in the box? sure, no problem, the plastic shell space is enough.