KC868-H32 Relay Controller REV:2.4 Problem after firmware update

[bvelinov]

Hello, today I ordered from your controller for control through the Tuya application, and in this regard I decided to change the firmware version with a new one downloaded from your site following all the steps as described. After the procedure is completed, my kc868-h32 is no longer the same. outputs 2 and 3 flash and the response time of the buttons is unstable. Please give me feedback and if there is the original version of my device, could you provide it to me?


I installed the firmware H32B_V508_230921

   

[admin]

that is "H32B" controller, not your "H32" . they are different product.
here is original firmware for KC868-H32

   2--H32_Relay_32.zip 
if you want KC868-H32 controller work with tuya app, you should add tuya adapter, here is video tour:
https://youtu.be/z67pRMLb4Rc

[bvelinov]

that is "H32B" controller, not your "H32" . they are different product.
here is original firmware for KC868-H32

   2--H32_Relay_32.zip 
if you want KC868-H32 controller work with tuya app, you should add tuya adapter, here is video tour:
https://youtu.be/z67pRMLb4Rc

Thanks for the quick reply! Everything is working fine now as before!

I also have a question about setting the clock or time zone on my device, how do I do it?

[admin]

i don't understand, where set the time zone?

[bvelinov]

I no longer have access to the KinCony Smart Home app, in which I used to set up scenes and time settings. When can I expect an update to the smart home app for newer versions of iOS, and will it continue to be active in the future?

[admin]

kincony cloud server stop use in 2024-12-31
https://www.kincony.com/forum/showthread.php?tid=5437