Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
updating firmware kc868-h32b
#1
my unit shipped with firmware version 4.13.34

I am attempting to upload version
Relay32_V437_210907.zip

OTA seams to run for only a few seconds and does not update

Using a serial cable and the Firmware Download Tool (firmware update tool download): https://www.kincony.com/download/KC868-C...loader.zip

it detects the bootloader
downloads progress 105/105
data send complete 
then when I press Run
it says Download finished begin running.


I power cycle the device that the firmware version is not updated??
thanks
Reply
#2
where is say the "firmware version 4.13.34" , take a photo. i think it's your wifi module's firmware version, not controller's firmware.
Reply
#3
(03-06-2023, 10:32 PM)admin Wrote: where is say the "firmware version 4.13.34" , take a photo. i think it's your wifi module's firmware version, not controller's firmware.


   
   
If this is the Wi-Fi firmware how does one see the controllers firmware?
Reply
#4
connect ethernet cable with your controller. open IP address in web browser, then you will see it.
   
Reply
#5
how to update firmware, see this video tour: https://youtu.be/LLIJe9VTVq8
Reply
#6
(03-07-2023, 02:10 PM)admin Wrote: how to update firmware, see this video tour: https://youtu.be/LLIJe9VTVq8


   
Would’ve helped to know that I needed to hold down the ethernet button until all the lights showed in order to turn it into TCP server static mode.

It shows version H32B_V4.29
Is  Relay32_V437_210907.zip a later version , from the numbering v437 looks later than v429 ?


At least I have access to the config , I assumed wrongly this would have been part of the web page available by Wi-Fi.
Reply
#7
https://www.kincony.com/forum/showthread.php?tid=2343 this is the newest version V4.46
yes, large number version is newer.
Reply
#8
Thumbs Up 
(03-07-2023, 10:34 PM)admin Wrote: https://www.kincony.com/forum/showthread.php?tid=2343    this is the newest version V4.46
yes, large number version is newer.


Relay32_V446_221013.zip  
Great that update works, thank you.
Reply
#9
ok
Reply


Forum Jump:


Users browsing this thread:
1 Guest(s)