Scene controller switch

[imoutofideas]

Hi there. I'm really liking your products and i will be starting a large DIY project sometime in the future so i'm creating a list of products to use. One thing i can't find are wall scene switches that would work by connecting them to digital inputs using RJ45 cable. I know you offer some but i'm aiming at something more customizable like: https://buyriteelectric.com/cdn/shop/fil...1705342406
So multiple push buttons (no touch) that could send a signal to digital inputs.
I'm from EU so i feel like my options are limited. I'm also open to suggestions if you know of another way to achieve this.

Thank you!

[admin]

you can use our HAv2 RS485 adapter board, so that you can use any push button panel, work with KinCony's controller. here is video tour: https://youtu.be/s5Htc43HqAc

[imoutofideas]

I see, and if i wanted to connect multiple RS485 light/scene switches and/or motors which product could i use?
For example if i were to buy and install (10+) of these switches which are using RS485: https://www.alibaba.com/product-detail/M...14145.html
Which product can i use to read keypresses in home assistant and use that to control relays of H8B board for example?

[admin]

if you know the rs485 device protocol, usually use by modbus protocol, so you can use "modbus controller" in esphome to read it.

[imoutofideas]

But where would these switches connect to? Is there a Kincony board that has mutliple RS485 inputs? Or can i just connect to dry contact digital input ports?

[admin]

if you are using multi RS485 switch panel, you can parallel all RS485 cable with one bus. KinCony board's digital input ports support dry contactor devices.

[imoutofideas]

I see. Thank you!