Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
KC868-A32
#1
Good morning ! I recently purchased the KC868-A32 card. My question is: can Kincony KCS and Home Assistant be used together? Thanks for your help.
Reply
#2
sure. you can download KCS firmware firstly , then integrate to home assistant by MQTT.
Reply
#3
Thank you very much for your quick response
Reply
#4
(12-25-2023, 12:08 AM)admin Wrote: sure. you can download KCS firmware firstly , then integrate to home assistant by MQTT.

Good morning ! How to integrate MQTT into my Home Assistant? Do you have a step-by-step instruction manual? Thanks for your help
Reply
#5
this is sample config yaml: https://www.kincony.com/forum/showthread.php?tid=3274
Reply
#6
(12-29-2023, 12:13 PM)admin Wrote: this is sample config yaml: https://www.kincony.com/forum/showthread.php?tid=3274
I have a KC868-A32 card. Do you have the yaml file?
THANKS
Reply
#7
here is A32 integrate to home assistant by ESPHome's yaml: https://www.kincony.com/forum/showthread.php?tid=1772
we suggest use esphome directly, not need to use KCS.
Reply
#8
Hello ! With KC868-A32 I would like to invert the state of the inputs to be ok with the logic state in Home Assistant?
THANKS
Reply
#9
if you config by ESPHome, just add "inverted" for INPUT option in yaml file.
Reply
#10
(05-04-2024, 11:47 PM)admin Wrote: if you config by ESPHome, just add "inverted" for INPUT option in yaml file.

Thank your very much
Reply


Forum Jump:


Users browsing this thread: