KC868-A32

[Sunoc]

Good morning ! I recently purchased the KC868-A32 card. My question is: can Kincony KCS and Home Assistant be used together? Thanks for your help.

[admin]

sure. you can download KCS firmware firstly , then integrate to home assistant by MQTT.

[Sunoc]

Thank you very much for your quick response

[Sunoc]

sure. you can download KCS firmware firstly , then integrate to home assistant by MQTT.

Good morning ! How to integrate MQTT into my Home Assistant? Do you have a step-by-step instruction manual? Thanks for your help

[admin]

this is sample config yaml: https://www.kincony.com/forum/showthread.php?tid=3274

[Sunoc]

this is sample config yaml: https://www.kincony.com/forum/showthread.php?tid=3274

I have a KC868-A32 card. Do you have the yaml file?
THANKS

[admin]

here is A32 integrate to home assistant by ESPHome's yaml: https://www.kincony.com/forum/showthread.php?tid=1772
we suggest use esphome directly, not need to use KCS.

[Sunoc]

Hello ! With KC868-A32 I would like to invert the state of the inputs to be ok with the logic state in Home Assistant?
THANKS

[admin]

if you config by ESPHome, just add "inverted" for INPUT option in yaml file.

[Sunoc]

if you config by ESPHome, just add "inverted" for INPUT option in yaml file.

Thank your very much