AS ESPHome yaml for home assistant

[admin]

   

Code:

esphome:
  name: as
  friendly_name: AS
  platformio_options:
    board_build.flash_mode: dio
  on_boot:
    - light.turn_on:
        id: led_ww
        blue: 100%
        brightness: 60%
        effect: fast pulse
esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
      CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
      CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
      CONFIG_AUDIO_BOARD_CUSTOM: "y"
  
psram:
  mode: octal  # quad for N8R2 and octal for N16R8
  speed: 80MHz
# Enable logging
logger:
  hardware_uart: USB_SERIAL_JTAG
# Enable Home Assistant API
api:
  encryption:
    key: "TFpb+pBAvQIS1MVwaA7EoJ2DkpWE+79UvVro7yMyGdU="
  on_client_connected:
        then:
          - delay: 50ms
          - light.turn_off: led_ww
          - micro_wake_word.start:
  on_client_disconnected:
        then:
          - voice_assistant.stop:
ota:
  - platform: esphome
    password: "1245211a05eef56614a2ef5a3f3e971c"
wifi:
  ssid: "KinCony"
  password: "a12345678"
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esp32-S3-Wake-Word"
    password: "LJfUrdJk3svP"
captive_portal:
button:
  - platform: restart
    name: "Restart"
    id: but_rest
switch:
  - platform: template
    id: mute
    name: mute
    optimistic: true
    on_turn_on:
      - micro_wake_word.stop:
      - voice_assistant.stop:
      - light.turn_on:
          id: led_ww          
          red: 100%
          green: 0%
          blue: 0%
          brightness: 60%
          effect: fast pulse
      - delay: 2s
      - light.turn_off:
          id: led_ww
      - light.turn_on:
          id: led_ww          
          red: 100%
          green: 0%
          blue: 0%
          brightness: 30%
    on_turn_off:
      - micro_wake_word.start:
      - light.turn_on:
          id: led_ww          
          red: 0%
          green: 100%
          blue: 0%
          brightness: 60%
          effect: fast pulse
      - delay: 2s
      - light.turn_off:
          id: led_ww
  
light:
  - platform: esp32_rmt_led_strip
    id: led_ww
    rgb_order: GRB
    pin: GPIO16
    num_leds: 1
    rmt_channel: 0
    chipset: ws2812
    name: "on board light"
    effects:
      - pulse:
      - pulse:
          name: "Fast Pulse"
          transition_length: 0.5s
          update_interval: 0.5s
          min_brightness: 0%
          max_brightness: 100%
         
         
# Audio and Voice Assistant Config         
i2s_audio:
  - id: i2s_in
    i2s_lrclk_pin: GPIO3  #WS
    i2s_bclk_pin: GPIO2 #SCK
  - id: i2s_speaker
    i2s_lrclk_pin: GPIO6  #LRC
    i2s_bclk_pin: GPIO7 #BLCK
microphone:
  - platform: i2s_audio
    id: va_mic
    adc_type: external
    i2s_din_pin: GPIO4 #SD pin on the INMP441
    channel: left
    pdm: false
    i2s_audio_id: i2s_in
    bits_per_sample: 32 bit
   
speaker:
    platform: i2s_audio
    id: va_speaker
    i2s_audio_id: i2s_speaker
    dac_type: external
    i2s_dout_pin: GPIO8   #  DIN Pin of the MAX98357A Audio Amplifier
    channel: mono
micro_wake_word:
  on_wake_word_detected:
    # then:
    - voice_assistant.start:
        wake_word: !lambda return wake_word;
    - light.turn_on:
        id: led_ww          
        red: 30%
        green: 30%
        blue: 70%
        brightness: 60%
        effect: fast pulse
  models:
    - model: github://esphome/micro-wake-word-models/models/v2/hey_jarvis.json
   
voice_assistant:
  id: va
  microphone: va_mic
  noise_suppression_level: 2.0
  volume_multiplier: 4.0
  speaker: va_speaker
  on_stt_end:
       then:
         - light.turn_off: led_ww
  on_error:
          - micro_wake_word.start: 
  on_end:
        then:
          - light.turn_off: led_ww
          - wait_until:
              not:
                voice_assistant.is_running:
          - micro_wake_word.start: 

yaml file download:
  AS-HA.txt (Size: 3.94 KB / Downloads: 123)

[eyevisions]

I followed the steps as you described. Only when I turn on the LED does it not listen. It stays at inactive. Me whisper and piper installation works. What am I overlooking? thanks in advance for the response.

[admin]

can you take some screen photo of voice assistant setting, home assistant "device" webpage of whisper and piper.

[eyevisions]

It works now.
The only thing is that you apparently pronounce hey jarvis better than I do. If I play a video with the explanation, it responds to you fine. When I ask it something arggggggggg

[admin]

you can use google translate to speak play voice" hey jarvis "

[eyevisions]

Dear,

it is possible that you use an open wake word from ha itself and not in the esp itself. I have now changed it to okay nabu which is already going better.

[admin]

the response speed is faster?