07-18-2024, 04:56 AM
Hello Everyone,
I have KC868-A8S v2.
I'm running Tasmota 10.0.0.3, and it appears the switch and relay assignments could be printed wrong?
When I move the physical switch on the unit it triggers the wrong relay.
Switch 1 - Relay 8
Switch 2 - Relay 7
Switch 3 - Relay 6
Switch 4 - Relay 5
Switch 5 - Relay 4
Switch 6 - Relay 3
Switch 7 - Relay 2
Switch 8 - Relay 1
Very confusing, but I'm wondering if tasmota has caused the issue, or is the printing on the unit incorrect?
![[Image: ESEGW1LoqrZPlFn_TVPO0a4BkHOIYSvJaAuDqnKxfSIMsw?e=ZH52w2]](https://syzmic-my.sharepoint.com/:i:/g/personal/terry_syzmic_com_au/ESEGW1LoqrZPlFn_TVPO0a4BkHOIYSvJaAuDqnKxfSIMsw?e=ZH52w2)
If I activate a relay through Tasmota, the correct relay is triggered.
![[Image: Eedu7WFmM39Hqf2mxpAvUPcBRDeGioxAWqiJmXea6BeyXw?e=P4faPp]](https://syzmic-my.sharepoint.com/:i:/g/personal/terry_syzmic_com_au/Eedu7WFmM39Hqf2mxpAvUPcBRDeGioxAWqiJmXea6BeyXw?e=P4faPp)
I have KC868-A8S v2.
I'm running Tasmota 10.0.0.3, and it appears the switch and relay assignments could be printed wrong?
When I move the physical switch on the unit it triggers the wrong relay.
Switch 1 - Relay 8
Switch 2 - Relay 7
Switch 3 - Relay 6
Switch 4 - Relay 5
Switch 5 - Relay 4
Switch 6 - Relay 3
Switch 7 - Relay 2
Switch 8 - Relay 1
Very confusing, but I'm wondering if tasmota has caused the issue, or is the printing on the unit incorrect?
If I activate a relay through Tasmota, the correct relay is triggered.