08-14-2024, 12:16 AM
(08-14-2024, 12:11 AM)lulu01 Wrote: My understanding is that the board needs 12-24V to operate. Are you sure the board is supposed to also be powered via USB-C? The relays need 12V to switch, I don't see the USB-C connector providing this.
https://www.kincony.com/raspberry-pi-iot-gateway.html
I had asked this and was told yes....I have a few R Pis running Home Assistant instances and they all power via USB C . The power supply I am using is designed for R Pi4 and does provide 12V and 2 amps. The jumper apparently is for this purpose but its only 3 pins so it can only be 2 positions or a 3rd option I suppose is no jumper ?
Cheers