09-05-2024, 07:11 PM
It seems that my outputs are not working (no leds, no voltage change).
I measured the voltage on the optocuplers and its ~1.1 V beetween optoupler legs (as on image):
I tride official firmware and esphome, both are responding to commands (on = 1.1V, off = 0.0V)
I measured the voltage on the optocuplers and its ~1.1 V beetween optoupler legs (as on image):
I tride official firmware and esphome, both are responding to commands (on = 1.1V, off = 0.0V)