Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lesson21- KC868-A8 ethernet work with home assistant by ESP home
#1

here is ESP home config file work with KC868-A8 by ethernet static IP:

esphome:
  name: relay1
  platform: ESP32
  board: esp32dev
 
 
# Example configuration entry for ESP32
i2c:
  sda: 4
  scl: 5
  scan: true
  id: bus_a


# Example configuration entry
ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO18
  clk_mode: GPIO17_OUT
  phy_addr: 0

  # Optional manual IP
  manual_ip:
    static_ip: 192.168.2.199
    gateway: 192.168.2.1
    subnet: 255.255.255.0 


# Example configuration entry
pcf8574:
  - id: 'pcf8574_hub'
    address: 0x24


# Individual outputs
switch:
  - platform: gpio
    name: "light1"
    pin:
      pcf8574: pcf8574_hub
      # Use pin number 0
      number: 0
      # One of INPUT or OUTPUT
      mode: OUTPUT
      inverted: false




# Enable logging
logger:

# Enable Home Assistant API
api:
Reply


Messages In This Thread
Lesson21- KC868-A8 ethernet work with home assistant by ESP home - by admin - 10-05-2021, 11:34 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)