HC868-AK firmware update

[leliodm]

the newest KCS v2 config IFTTT webpage, let every button output customize RS232 command output.
so you need create 32 IFTTT command for every button. such as :
button1 (DI1) output command "RELAY-SET-255,1,1" by RS232 or RS485.

just to see if I am making some mistakes. 

1. I need to go under general and enable custom protocol (e.g., create a new general protocol with ID 1) with router RS232 and output command RELAY-SET-255,1,1
2. I need to go under IFTTT and create a new rule which if D1 is pressed then it triggers the general protocol 1 that I created 
3. under protocol --> general I need to enable the RS232 with baud 115200, stop bit 1, data bit 8, parity no.

Perhaps I am missing something because it is not working.

thanks

---

I was able to make it work. Thank you. 
the KCS firmware shows 40 DI inputs. only 36 are accessible from the wire interface. any other hidden connector?