01-19-2025, 08:11 PM
(01-19-2025, 01:19 AM)admin Wrote: post your H32 vircom setting screen photo at here. make sure you have set network work mode= "TCP Server", then MUST re power on of your H32.
tuya adapter use by wifi is better.
Hello and thank you for your reply
Attached is the image with Vircom connected to H32. I did set the mode to TCP Server and restarted H32. For the KC868-ATC I tried wifi with no success. I attached additional screens with H32, KC868-ATC and the flashing process.
The H32 is connected to the main router. There is a secondary router configured as AP for the main router. Should the KC868-ATC be flashed/configured to the main router? When i tried it was connected to the secondary one (AP for the main).
Any suggestions are more then welcome.
Thank you very much