08-19-2022, 11:59 PM
(This post was last modified: 08-20-2022, 12:03 AM by ahmedk4444@yahoo.com.)
Thank you admin for helping and remote sharing the A16 setup and H32B and testing in home asisstant on home asisstant onlocal network only.
Some important questions and comments on this current steps and device tests.
Terminal switch board :-
1- H32B working fine and smoothly on home assistant app on mobile also by remote control but using switches on/off connected to terminal switchboard is not functioning wells, some circuits on and don't go off when requested off , some not responding at all, some respond but with significant delay!!
What is the reason of this how to improve the quick response?
2- if i need to connect electric curtain to some late circuits of H32B after configured the lighting, how i program some H32B channel for motor mode for certain channels only?
3. If i would like to use the 6 inputs of H32B for irrigstion system water valve opening / closing for 4 zones each is working on 48V and water pump of the house to see the status if it will working or not working 220V can be used with dry contact of H32B inputs.
4. How i can creat a scene for lighting on / off of H32B on home assistant and select some channel circuits to work at dusk at sunset and switch off at sunrise?
5. Still struggle to sort out working of home assistant on 4G outside local network using DNNS and give access to my family members to control controller using home assistant through local and 4 G.
Thank you
Elecserv
Some important questions and comments on this current steps and device tests.
Terminal switch board :-
1- H32B working fine and smoothly on home assistant app on mobile also by remote control but using switches on/off connected to terminal switchboard is not functioning wells, some circuits on and don't go off when requested off , some not responding at all, some respond but with significant delay!!
What is the reason of this how to improve the quick response?
2- if i need to connect electric curtain to some late circuits of H32B after configured the lighting, how i program some H32B channel for motor mode for certain channels only?
3. If i would like to use the 6 inputs of H32B for irrigstion system water valve opening / closing for 4 zones each is working on 48V and water pump of the house to see the status if it will working or not working 220V can be used with dry contact of H32B inputs.
4. How i can creat a scene for lighting on / off of H32B on home assistant and select some channel circuits to work at dusk at sunset and switch off at sunrise?
5. Still struggle to sort out working of home assistant on 4G outside local network using DNNS and give access to my family members to control controller using home assistant through local and 4 G.
Thank you
Elecserv