08-29-2022, 07:56 AM
(This post was last modified: 08-29-2022, 08:16 AM by ahmedk4444@yahoo.com.)
For question 2 answer,
As i mentioned the home assistant crashed when try to run the duckdns to work on the internet.
I can't retrive the home assistant again untill do the same steps from the beging
1- run Rpiboot.
2. Install drivers
3. Install home assistant.
And back to original installation and mot seen the usb again
4. I repeat the steps that you mentioned before to configure the usb port of rasspery pi but no success.
edit the boot config file (/boot/config.txt) and add:
dtoverlay=dwc2,dr_mode=host
Then reboot the Pi. But not able to use the built-in USB 2.0 ports as before.
As i mentioned the home assistant crashed when try to run the duckdns to work on the internet.
I can't retrive the home assistant again untill do the same steps from the beging
1- run Rpiboot.
2. Install drivers
3. Install home assistant.
And back to original installation and mot seen the usb again
4. I repeat the steps that you mentioned before to configure the usb port of rasspery pi but no success.
edit the boot config file (/boot/config.txt) and add:
dtoverlay=dwc2,dr_mode=host
Then reboot the Pi. But not able to use the built-in USB 2.0 ports as before.