12-15-2022, 07:38 AM
After downloading firmware again the module is powering on, but not sending analog values regularly (autoreport is turned on) or sending the same value for all analog inputs with mqtt.
Example:
I have 2 light sensors at 2 different rooms. All in dark. When i go to one of the sensors with a flashlight the same value is sent via mqtt for the other sensor too.
P. S. The module is new and the white led for "Ethernet mode - client is flickering"
What is the problem? Thank you.
Example:
I have 2 light sensors at 2 different rooms. All in dark. When i go to one of the sensors with a flashlight the same value is sent via mqtt for the other sensor too.
P. S. The module is new and the white led for "Ethernet mode - client is flickering"
What is the problem? Thank you.