03-07-2023, 08:22 AM
right, use USB-C cable to download. not need to use "KCS" firmware. there is two way add A16 to home assistant.
1: download "KCS" to ESP32, integrate A16 to home assistant by MQTT.
2: use ESPHome download kincony's esphome config yaml file.
if you want easily, just use ESPHome is ok.
1: download "KCS" to ESP32, integrate A16 to home assistant by MQTT.
2: use ESPHome download kincony's esphome config yaml file.
if you want easily, just use ESPHome is ok.