KC868-M16v2 iot ESP32 power meter board released

[admin]

We have designed KC868-M16v2 new version (ESP32 16 Channel CT Clamp Energy Monitor) for home automation DIYer. it can easy integrate to home assistant by ESPHome. the hardware have 16CH CT Clamp sensor INPUT ports + 3CH ZMPT101B voltage sensor + SHT30 temperature & humidity sensor + Ethernet POE+ WiFi + Bluetooth + DS3231 RTC module + SSD1306 I2C LCD display + SD card.

[Mosfet3]

Hi,
I interested in this product, but I want to ask about Power Factor correction. Is it realized, or just calculates power by formula P=U*I ??? Is it possible to assign clampts to different voltage inputs? Asking because if i have 3 pahase input, I need to assign current consumption to used input.

[admin]

Power Factor need calculate by formula.
M16v2 have 3 channel voltage detect port, so it can monitor 3 phase power line, A, B, C. it's ok for you.

[Mosfet3]

Question is: Is it possible to set CH1 current to B voltage? or Ch2 to A voltage, hope you understand

[admin]

it just set by ESPHome, not MUST CH1 current need with X CH voltage

[Mosfet3]

Ok, so only thing that missing on this device is power factor correction

[admin]

maybe M30 suitable for you. here is details: https://www.kincony.com/esp32-energy-monitor-board.html

[Mosfet3]

M30 have power factor corrections?

[admin]

no,it also need calculated by software.

[Mosfet3]

So calculations not integrated to your firmware?