"KCS" v1.0.27 firmware for KC868-A64 A128

[admin]

because KCS v2 for KC868-A64 and KC868-A128 sometimes not very stable, not enough memory.
we suggest use this special firmware KCS v1.0.27 for KC868-A64 and KC868-A128. 
improvement:
support timer set delay value from (1-65535), before version is (1-255).

[Regis]

I confirm my problem is fixed with V1.0.27 : connexion with ESP HOME is ok . thank you to support for his help. Joined my .yaml config

---

my yaml configuration that works

[admin]

ok, good.

[Regis]

Hi,
Is the problem of memory on firmware V2 on KC868--A64 fixed ? Is it possible to use it ?
Best regards

[admin]

we suggest to use v1.0.27 for A64 and A128.
if you not use tuya app, you can download KCS v2 firmware for A64. because tuya app will cost many memory.

[saleem]

There is no IFTTT in this version and the input setting for v2+ is limited to Reverse Level only.

[admin]

yes, because IFTTT not enough memory for A64 and A128.

[kkabuu]

Hello. how can I use this {"KCS" v1.0.27 firmware for KC868-A64 A128} at the same time with home assistant.
I want those trunks from KCS to continue to be accessed from A128

[admin]

download KCS v1.0.27 to A128, enable MQTT, use MQTT integrate to home assistant.