AS ESPHome yaml for home assistant

[admin]

"Is it possible that in 1 yaml file to program bought gpio15 an gpio 16 leds?" what this means? you can control both LED with GPIO15 and GPIO16, it's OK.

[datkinson]

I recently purchased and setup the KinCony Voice Assistant device. Works great, but the volume from the speaker is too low to hear. How can I increase the volume from the speaker?

[admin]

if you use ESPHome, you can set the volume in yaml file.

[datkinson]

if you use ESPHome, you can set the volume in yaml file.

Could you give me an example? I've searched online, but don't see any examples of increasing the volume in the yaml file.

[admin]

   
see here in details: https://esphome.io/components/speaker/index.html

[filip.richter]

Hi all,

I have my working configuration here, also using media player:

Code:

esphome:
  name: assistant1
  friendly_name: Assistant 1
  platformio_options:
    board_build.flash_mode: dio
  on_boot:
    - light.turn_on:
        id: notify_center
        blue: 100%
        brightness: 60%
        effect: fast pulse
esp32:
  board: esp32-s3-devkitc-1
  framework:
    type: esp-idf
    sdkconfig_options:
      CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
      CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
      CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
      CONFIG_AUDIO_BOARD_CUSTOM: "y"
external_components:
  - source: github://pr#7672
    components:
      - audio
      - speaker
      - i2s_audio
      - speaker
    refresh: 0s
psram:
  mode: octal  # quad for N8R2 and octal for N16R8
  speed: 80MHz
# Enable logging
logger:
  hardware_uart: USB_SERIAL_JTAG
# Enable Home Assistant API
api:
  encryption:
    key: "*********************************************"
  on_client_connected:
    then:
      - delay: 50ms
      - light.turn_off: notify_center
      - micro_wake_word.start:
  on_client_disconnected:
    then:
      - voice_assistant.stop:
ota:
  - platform: esphome
    password: "****************************************"
wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  fast_connect: True
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Assistant1 Fallback Hotspot"
    password: "********************************"
web_server:
  port: 80
captive_portal:
button:
  - platform: restart
    name: "Restart"
  - platform: template
    name: "Start assist"
    on_press:
      then:
        - voice_assistant.start
  - platform: template
    name: "Start continious assist"
    on_press:
      then:
        - voice_assistant.start_continuous: 
  - platform: template
    name: "Stop assist"
    on_press:
      then:
        - voice_assistant.stop: 
       
switch:
  - platform: template
    id: mute
    name: Mute
    optimistic: true
    on_turn_on:
      - micro_wake_word.stop:
      - voice_assistant.stop:
      - light.turn_on:
          id: notify_center
          red: 100%
          green: 0%
          blue: 0%
          brightness: 60%
          effect: fast pulse
      - delay: 2s
      - light.turn_off:
          id: notify_center
      - light.turn_on:
          id: notify_center
          red: 100%
          green: 0%
          blue: 0%
          brightness: 30%
    on_turn_off:
      - micro_wake_word.start:
      - light.turn_on:
          id: notify_center
          red: 0%
          green: 100%
          blue: 0%
          brightness: 60%
          effect: fast pulse
      - delay: 2s
      - light.turn_off:
          id: notify_center
light:
  - platform: esp32_rmt_led_strip
    id: notify_center
    rgb_order: RGB
    pin: GPIO16
    num_leds: 1
    rmt_channel: 0
    chipset: ws2812
    name: "Notify light"
    effects:
      - pulse:
      - pulse:
          name: "Fast Pulse"
          transition_length: 0.5s
          update_interval: 0.5s
          min_brightness: 0%
          max_brightness: 100%
  - platform: esp32_rmt_led_strip
    rgb_order: GRB
    pin: GPIO15
    num_leds: 3
    rmt_channel: 1
    chipset: ws2812
    name: "Lower light"
    id: notify_lower
    effects:
      - pulse:
      - pulse:
          name: "Fast Pulse"
          transition_length: 0.5s
          update_interval: 0.5s
          min_brightness: 0%
          max_brightness: 100%
      - addressable_color_wipe:
      - addressable_scan:
          name: Scan Effect
          move_interval: 300ms
          scan_width: 1
      - addressable_scan:
          name: Scan Effect 2
          move_interval: 800ms
          scan_width: 1
# Audio and Voice Assistant Config
i2s_audio:
  - id: i2s_in
    i2s_lrclk_pin: GPIO3  #WS
    i2s_bclk_pin: GPIO2 #SCK
  - id: i2s_speaker
    i2s_lrclk_pin: GPIO6  #LRC
    i2s_bclk_pin: GPIO7 #BLCK
microphone:
  - platform: i2s_audio
    id: va_mic
    adc_type: external
    i2s_din_pin: GPIO4 #SD pin on the INMP441
    channel: left
    pdm: false
    i2s_audio_id: i2s_in
    bits_per_sample: 32 bit
speaker:
    platform: i2s_audio
    id: va_speaker
    i2s_audio_id: i2s_speaker
    dac_type: external
    i2s_dout_pin: GPIO8  #  DIN Pin of the MAX98357A Audio Amplifier
    channel: left
    sample_rate: 48000
media_player:
  - platform: speaker
    name: "Assistent media player"
    id: speaker_media_player_id
    speaker: va_speaker
    sample_rate: 48000
    on_play:
      - logger.log: "Playback started!"
      - light.turn_on:
          id: notify_lower
          red: 30%
          green: 30%
          blue: 0%
          brightness: 100%
    on_idle:
      - logger.log: "Playback finished!"
      - light.turn_off: notify_lower
micro_wake_word:
  on_wake_word_detected:
    then:
    - voice_assistant.start:
        wake_word: !lambda return wake_word;
  models:
    - model: github://esphome/micro-wake-word-models/models/v2/okay_nabu.json
voice_assistant:
  id: va
  microphone: va_mic
  noise_suppression_level: 2.0
  volume_multiplier: 4.0
  media_player: speaker_media_player_id
  on_start:
    - light.turn_on:
        id: notify_center
        red: 30%
        green: 30%
        blue: 70%
        brightness: 60%
        effect: fast pulse
    - media_player.volume_set: 100%
  on_stt_end:
    - light.turn_off: notify_center
  on_error:
    - micro_wake_word.start:
  on_end:
    - light.turn_off: notify_center
    - wait_until:
        not:
          voice_assistant.is_running:
    - micro_wake_word.start:
  on_tts_start:
    - light.turn_on:
        id: notify_center
        red: 0%
        green: 30%
        blue: 0%
        brightness: 60%
        effect: fast pulse
  on_tts_end:
    - delay: 2s
    - light.turn_off: notify_center

May help someone, it took me 3 days to make it working

[admin]

Thank you very much share your config file to help people.