KC868-E16T Factory Original Firmware for Tuya App

[Alpha21]

do you must use tuya app at the same time? or just only use digital input and RF remote control?

i need to simultaneously use tuya app and RF at the same time

[admin]

ok, when our team have free time, let remote button 1-16 support toggle relay 1-16. make a new firmware.

[Alpha21]

do you must use tuya app at the same time? or just only use digital input and RF remote control?

i need to simultaneously use tuya app and RF at the same time

ok, when our team have free time, let remote button 1-16 support toggle relay 1-16. make a new firmware.

Any update with regards this? Much apprciated

[admin]

new firmware updated download at here:
https://www.kincony.com/forum/showthread.php?tid=3170

[admin]

here is video tour for you:

[bimber200]

Witam wszystkich,

po zakupie urządzenia wgrałem oprogramowanie, a urządzenie nie komunikuje się przez Ethernet.
Proszę pomóż mi.

[admin]

compare this photo as yours. you have not select item 1-3, please check it.

[bimber200]

Hello,
I erased the module with the "ERASE" command and then uploaded 4 files.

The module does not communicate with the LAN.

After uploading the "E16T-RF-Tuya.bin" file, the device connected to the router (192.168.1.200) but I cannot connect to it via a web browser.

The "ping" command works correctly.

UDP_SCAN_LIST does not detect it.

Changing the computer did not change anything.
Maybe it depends on the router's IP address? (192.168.1.254).

[admin]

this is not KCS firmware, not use by webpage. after download firmware, you can use tuya app, INPUT toggle OUTPUT and 433MHz remote directly.

[bimber200]

But after uploading:
KC868-E16T_tuya.nodemcu-32s.bin
and the other three files E16T does not see the LAN
I do not know what to install on this board since what is recommended does not work...