Understand Configuration For Own Software

[admin]

KC868-COLB updated new firmware, download link: https://www.kincony.com/forum/showthread.php?tid=1751

[Dm81]

KC868-COLB updated new firmware, download link: https://www.kincony.com/forum/showthread.php?tid=1751

thank you very much for your fast upport

[admin]

you are welcome.

[Dm81]

you can't read "switch terminal board" input by COLB. H32BS have this function, unlink switch input with relay output, just feedback key message. But if you want do it by H32B, i suggest you get the message from "switch terminal board" directly, if you server is long distance with "switch terminal board", if you can't connect it with RS232 cable, i think you can use a RS232-Ethenret adapter, just let RS232 message send to network to your server, then you can do your logical for relay controller according to the switch terminal board's input.

hello
as suggested I bought adapter but I need to know the composition of hex string, can you give me the details? Attached a screen shot of hex string received
thank you

[admin]

what you have send? what you have receive feedback?

[Dm81]

what you have send? what you have receive feedback?

I didn't send nothing, the server of adapter send me that hex string when I pushed some button connected to the switch terminal board

[admin]

use 115200bps by string format to see what feedback, not use HEX format.