KC868-AP

[eligijus]

hi, maybe you can upload firmware bin file with esp KC868-AP

[admin]

for "KCS" firmware?

[eligijus]

Not necessarily, the old version is also suitable, you can upload some firmware, because I can't find any information with this board.

[admin]

developing new firmware for KC868-AP now, when completed, we will upload here and YouTube channel.

[eligijus]

hi when are you planning to release the firmware? I'm really looking forward to it because dbr I can't turn on the lights in my house?

[admin]

"KCS" firmware for KC868-AP will release in furture. now what problem with you? do you use esphome?

[eligijus]

I use the home assistant and I was a little interested in how to sign up for the esp home assistant, but I don't know how to program the kc 868-ap board, because I'm not a programmer. Maybe you could upload some instructions on how to start the board with home assistant.

[admin]

you can integrate KC868-AP to home assistasnt by ESPHome, it's very easy. here is config file content:
https://www.kincony.com/forum/showthread.php?tid=2477

[eligijus]

you can integrate KC868-AP to home assistasnt by ESPHome, it's very easy. here is config file content:
https://www.kincony.com/forum/showthread.php?tid=2477

Hello, I wrote esp32 and started the board with home assistant, but the input switches do not work for me. After that, I need all input 16 channels to work separately and I do not promise to control the rgbw band. It's just that I have 16 individual dimmer switches in groups that need 1-10v control and to work with switches. Maybe you can edit the program to work and upload the corrected file

[admin]

digital input can't use?
your LOG photo, there is error of PCF8574, maybe have set wrong address, please check.