How to use tasmota for KC868-A16 via PCF8574 IIC extend GPIO

[MysterX]

wifi and ethernet can't work at the same time, disable your wifi, just use ethernet.

Thank you for the response,

I have tried to configure static IP, but looks like it is not work now.
BTW, the board have received IP by DHCP without any issues after wifi was disabled.

[admin]

do you static IP address and your computer use by same router?

[MysterX]

I have connected the board and my Laptop directly, without router.

[admin]

no, must need to use a router if use by DHCP.

[GabrielRR]

I bought a new A16 board, and I would like to put tasmota firmware, should I use the image from 2022 (in this post), or should I do was described in the the video https://www.youtube.com/watch?v=8NqOW0HJ...KinConyIoT , in order to have the last image?

[admin]

all can work, you can download from before link is ok.

[GabrielRR]

all can work, you can download from before link is ok.

Is it possible to flash again with kincony firmware?

[admin]

sure, no problem.

[GabrielRR]

Hi,
First of all thank you for your help. You always help and give very quick answers. Your product is quite good!!!
I would like to know if it is possible to have the latest firmware from tasmota (it have matter protocol) to this board.
I've already try to update the firmware and I can't.

[admin]

sure, you can download newest tasmota (include MATTER). we already have a video tour, use tasmota MATTER firmware in KinCony KC868-A series ESP32 board. here is video tour:
https://youtu.be/K9PMHzNPySI MATTER for Apple homekit
https://youtu.be/lb6V9-gQmII MATTER for Amazon Alexa